Skip to content

LT218 Hollywood Vintage Fresnel Spotlight On Rolling Stand

Rental Price
$175
Quantity Owned
2
Dimensions
72″H × 32″W × 32″D

About this prop

This vintage Fresnel Spotlight is on a rolling stand. No Hollywood set is complete without these beauties!

These lights are intended for decorative prop use and assumed to be non-functional.

The front opens, and you can easily outfit them with standard clamp lights or some other kind of bulb inside to make them light up.

Additional details

Additional measurements:

  • Fixture: 23″H x 19″W x 20.5″D
  • Stand:
    • Min. height: 43″ (75″ total height w/light)
    • Max. height: 90″ (127″ total height w/light)
    • Length of legs: 15″
    • Distance between legs: 32″

This item is intended for decorative prop use only. It is not intended as a functional/practical item.

How-to: Removing the front glass element to add a practical light

Refer to the last slide in the photo gallery for a visual guide

1. Find the ring seated around the edge and just in front of the glass element, and pinch where there is a gap in the ring

2. Lift and remove the ring, making note of the metal posts keeping it in place (they are located around the edge of the glass and attached to the lamp fixture/lamp housing)

3. Carefully lift and remove the glass element to access the interior

4. Reverse the steps to put back the glass and re-secure


Information

Prop SKU
LT218
Name
Hollywood Vintage Fresnel Spotlight On Rolling Stand
Rental Rate
$175 each
Quantity Owned
2
Overall Dimensions
72″H × 32″W × 32″D

Additional details

Additional measurements:

  • Fixture: 23″H x 19″W x 20.5″D
  • Stand:
    • Min. height: 43″ (75″ total height w/light)
    • Max. height: 90″ (127″ total height w/light)
    • Length of legs: 15″
    • Distance between legs: 32″

This item is intended for decorative prop use only. It is not intended as a functional/practical item.

How-to: Removing the front glass element to add a practical light

Refer to the last slide in the photo gallery for a visual guide

1. Find the ring seated around the edge and just in front of the glass element, and pinch where there is a gap in the ring

2. Lift and remove the ring, making note of the metal posts keeping it in place (they are located around the edge of the glass and attached to the lamp fixture/lamp housing)

3. Carefully lift and remove the glass element to access the interior

4. Reverse the steps to put back the glass and re-secure


Categories

Sign-up for ACME Brooklyn's newsletter